Internal Hitch
The superior quality steel moulded internal hitch is totally safe. It is perfectly moulded and hidden under the rear fence; the zinc coated tongue and the 1''7/8 chromed ball are removable.
Installation guide
Tools needed for the installation
To start installing your hitch you will need :
- Torx screwdriver T 30
- Wrench #10
- Wrench 5/16
- Allen key 4 mm
List of parts
| 12 Bolts | 12 X 5/16 |  |
| 12 Flat washers | 5/16 |  |
| 12 Lock nuts | 5/16 |  |
| 1 Bracket Kit |  |
1 Reinforcement plate( right side ) |  |
| 1 Reinforcement plate( left side ) |  |
|
| 1 T Shape central part |  |
Parts list
Follow step by step :
-
Take of the the fender supports from the frame
Fender support
-
Take off the original reinforcement plate inside the fender support and eliminate it.
Original strengthening bar
-
3. Take the back fender and flip it upside down to install the hitch. Unscrew the 6 original bolts and replace them with the new chromed bolts inside the installation kit.
-
Fix the fender support and our left side strengthening bar ( rear) in position.
-
Place the T shape central part on top. Screw everything together loosely using the two flat washers ( one on top and bottom ) and the locking nuts.
-
Proceed the same way on the right side.
-
Take the red tape of the brackets and place them on the frame as shown on the picture. Use the 5/16 bolts to keep the brackets in place. Proceed the same way on the left side
-
Put the fender supports back in their position using the 6 new bolts. Screw on the new strengthening bars to the brackets already in place.
- Now you can tighten all bolts and nuts safely.
We wish you a very plaisant ride.
Jack Industries
