Les industries Jack

Track Arctic Cat

  • Bearcat JACK

  • Z-1 JACK

  • M JACK

  • Seat Jack TR

  • F7 Jack

  • TA Jack

  • Cat Jack

Installation Guide

  1. Remove the security clip and wire on the Seat Jack and unscrew de 4 knobs ( 3 turns, do not unscew completely). Pull on the mounting brackets in order to install it.

  2. Take off the original seat from your snowmobile.

  3. Install the mounting brackets on each side, even with the rear to the tunnel of the snowmobile. The brackets must be install upward. There are different kind of brackets, please take a minute to see what kind of brackets you have to install on your snowmobile.

  4. Reinstall the original seat on the snowmbile.

  5. Slide in your Seat Jack into the mounting brackets, place the saftey wire on back knob and tighten the four (4) knobs. Install the saftey clip in its place behind the Seat Jack.

  6. Adjust and screw the cushion to the desired position (3 screws included).

  7. After the installation of your Seat Jack, do not forget to stick your warning sticker directly on your snowmobile, which is supplied in your bag of bolts.